26+ Tech Lighting Pendant Installation Instructions

When installing and using this system, please adhere to the following basic safety precautions:

Tech lighting pendant installation instructions. This product is etl listed and suitable only for indoor dry locations and approved for use at any height above the finished floor. Specification sheets, videos, revit, ies, guides, downloads | tech lighting. Tech lighting lamp shield and never place flammable

Use only the type of lamp and maximum wattage indicated in this instruction manual. The slumped glass provides visual movement to the exterior while giving just the right amount of visual fun to the inner opal glass diffuser. For the best lighting results, pendant lights should be hung at a height of roughly 60 to 66 inches above the floor, or 30 inches above the surface of a table.

Cut the coaxial cable to the. Connect the red driver wire to the other insulated pendant wire. These instructions are provided for your safety.

Our expert walks you through each. Cgl8 inst installation instructions all specifications subject to change without notice. Feed end of the pendant cord through the cap, cord grip, and strain relief into the canopy.

Before installing fixture, make sure the power to the circuit is turned off at the main fuse box / circuit breaker utility box. Use only the type of lamp and maximum wattage indicated in this instruction manual. For contech’s limited product warranty, go to www.contechlighting.com.

• installing contrary to instructions may cause unsafe conditions. When desired height is achieved, tighten the cap. Green oaks oversized pendant 241179, 241103 important safety instructions: